CG-75FXII PLUS
Mimaki CG-75FXII Plus
New world standard for
multi-cutting plotter
CG-FXII Plus is the roll-to-roll cutting plotter series that redefines cutting standards, thanks in part to the innovative ID CUT function.
When combined with Mimaki printers, it enables continuous print-and-cut operations with minimal operator intervention.
THE PERFECT CUTTING PLOTTER FOR ANY TYPE OF JOB
The CG-75FXII Plus introduces its new ID Cut function, significantly improving work efficiency. When used in combination with Mimaki printers, continuous cutting operations can be performed automatically for multi-product and small-quantity sticker and label orders.
It allows an entire operation to be completed from a single data specification, enabling operators to focus on other tasks at the same time.
High pressure
Increased pressure up to 550 grams for easy cutting through thick paper.
ID Cut
A professional cutting solution that digitizes cutting data (in barcode form)
User-friendly software
Supplied with a Windows driver, Simple POP and FineCut for seamless integration with Mimaki printers.
Corner Cut
This technology creates the perfect intersection of all sharp corners in a single contour, ensuring the ideal cut.
Mimaki CG-75FXII Plus
ADVANTAGES
For even more confidence, our products are GREENGUARD GOLD certified.
GREENGUARD GOLD certified products meet strict standards regarding low volatile organic compound emissions and reinforce that the product is suitable for use in places such as schools and health centers, without polluting indoor air quality.
Mimaki CG-75FXII Plus
SPECIFICATIONS
| CG-75FXII Plus | CG-130FXII Plus | CG-160FXII Plus | ||
|---|---|---|---|---|
| Acceptable sheet width | 90mm~1,040mm (3.54″~40.9″) | 90mm~1,580mm (3.54″~62.0″) | 90mm~1,880mm (3.54″~74″) | |
| Rolled media weight | 18kg (40 lb) or less | 22kg (49 lb) or less | ||
| Roll outsied diameter | φ200mm (7.87″) or less | |||
| Effective cutting area *1 | 760mm x 51m (29.9″ x 167′) | 1,300mm x 51m (51.2″ x 167′) | 1,600mm×51m (62.9″×167’) | |
| Maximum auto cutting width *2 | 870mm (34.2″) | 1,425mm (56.1″) | 1,720mm (67.7″) | |
| Maximum cutting speed | 100cm/s (39.3″/s) | |||
| Maximum moving speed | 140cm/s (55″/s) (In a 45° direction and in a pen-up state) | |||
| Adjustable speed range *3 | 1-10cm/s : 1cm step adjustment (0.39″-3.94″/s : 0.39″ step adjustment) 10-50cm/s : 5cm step adjustment (3.94″-19.68″/s : 2″ step adjustment) 50-100cm/s : 10cm step adjustment (19.68″-39.37″ : 3.94″ step adjustment) | |||
| Mechanical resolution | 5µm (0.0002″) | |||
| Command resolution | 25μm, 10μm(MGL-IIc), 100μm, 50μm(MGL-Ic1) | |||
| Repeatability | ±0.2mm (Excluding shrinkage / expansion caused by the film temperature) | |||
| Accuracy assurance range (Repeatability) | 760mm x 10m (29.9″ x 32.8′) | 1,300mm x 10m (51.2″ x 32.8′) | 1,600mm x 10m (63.0″ x 32.8′) | |
| Max. pressure | 500g | |||
| Range of down pressure | Cutter | 10~20g(2g step), 20~100g(5g step), 100~500g(10g step) | ||
| Pouncing | 10~20g(2g step), 20~100g(5g step), 100~500g(10g step) | |||
| Pen | 10~20g(2g step), 20~100g(5g step), 100~150g(10g step) | |||
| Acceptable sheet *4 | Vinyl up to 0.25mm(0.01″)thickness, Fluorescent type vinyl Reflective sheet | |||
| Acceptable sheet for pouncing *5 | Paper thickness: 0.06~0.13mm (0.0024″~0.005″) | |||
| Applicable tools *6 | Cutter, Water based ball-point pen, Oil based ball-point pen, Pouncing tool | |||
| Certifications | VCCI class A, FCC class A, ETL IEC 60950-1 CE Marking (EMC, Low voltage, Machinery directive, and RoHS), CB, REACH, RCM, EAC | |||
| Type of command | MGL-II c / I c1 | |||
| Interface | RS-232C, USB | |||
| Receiver buffer size | 30MB Standard (20MB when in sorting) | |||
| Operational environment | Temperature: 5~35°C (41~95°F), 35%–75% RH (Non-condensing) | |||
| Power requirement | AC100V~240V 1A 50/60Hz | |||
| Power consumption | 100W or less | |||
| Dimensions (WxDxH) | 1,285mm(50.5″)x 700mm(27.5″)x 1,217mm(47.9″) | 1,825mm(71.8″)x 700mm(27.5″)x 1,217mm(47.9″) | 2,125mm(83.6″)x 700mm(27.5″)x 1,217mm(47.9″) | |
| Weight (with stands) | 47kg (104 lb) | 62kg (137 lb) | 70kg (154 lb) | |
MIMAKI CUTTING SOFTWARE
FineCut9/Coat9
A plug-in software for advanced designers that offers complete integration with Mimaki printers and enables design and production from within Adobe® Illustrator or CorelDRAW®.
FEATURES OF THE CG-FXII PLUS SERIES
ID CUT function to automate the cutting process
Mimaki has equipped the cutting plotters of the CG-FXII plus series with a new cutting function, ID CUT, which makes the work process continuous and automatic.
The plotter autonomously detects and reads the barcodes and performs the cutting automatically, whereas in the past the operator had to scan the barcode and forward the cutting information to the machine. Operator intervention is now reduced to a minimum.
He avoids errors, saves material and speeds up the process.
The CG-FXII Plus series cutting models used in combination with the JV300 Plus printer create a continuous, automatic printing and cutting process, with high performance and excellent quality.
The advanced cutting functions that the CG-FXII plus series plotters are equipped with allow you to choose 4 different cutting modes based on the work to be performed or the operator’s needs.
It is possible to cut with the continuous detection of the registration marks or alternatively with the reading of the bar code which includes all the data necessary for processing. Mimaki also allows you to set cutting without marks or eliminate margins, saving material.
The optical sensor allows the registration marks previously printed on the material to be automatically recognized at high speed, the cutting head activates the functions necessary to obtain an accurate result.
Mimaki FineCut 9 software, included in Mimaki cutting plotters, allows rapid movement of the blade between registration marks and various cutting functions.
Constant material feeding and alignment even at high speeds. The cutting material is constantly kept under control by the media hold which allows precise feeding and alignment. This feature further optimizes cutting precision, even in the presence of very long jobs.
In addition to carving the material, thanks to the Mimaki pass-through cutting function, it is also possible to cut the liner coupled to the support, thus obtaining images already cut out and die-cut. The stickers remain attached to the reel via small joining points that keep them in position after processing. Easy to handle and ship, this way the stickers, in sheets or wrapped in rolls, are ready for use and perfectly in order.
Die-cutting is also possible for materials that do not have coupled liner.
The cutting head of the CG-FXII plus models is very sophisticated. It was in fact designed to accelerate data recognition, automate the work process and offer some additional features that make cutting extremely accurate.
On the cutting head, in addition to the optical sensor, there is an automatic sheet cutting blade, a laser pointer and a two-position swivel blade holder.
- The pressure of the pinch rollers is adjustable (strong/weak) based on the thickness of the materials and the different types of finishes of the support to be cut.
- Three selectable cutting speeds to ensure correct and easy positioning of the head on the cutting point.
- The Over-Cut function ensures that the starting point of the cut is automatically overlapped with the final point, preventing uncut support parts from remaining. This ensures that the design is cut completely and that the edges are cut cleanly without residue, even on thick or viscous materials.
- Front or rear media loading.
- Special pen holder adapter.
- USB interface.
Mimaki CG-75FXII Plus
CORE TECHNOLOGY
This cutting plotter features Mimaki Core Technologies that deliver the best quality, maximum productivity
and minimize risks that can delay production. See below for a list of core technologies included in the CG-FXII Plus Series.
ID Cut
ID Cut is a Mimaki solution that prints cutting data in the form of a barcode between the registration marks of the images. On the cutting plotter, the barcode and registration marks are scanned by an optical sensor and cutting starts accordingly, without the need to send the cutting data separately, reducing human intervention.
Crop Mark DetectioN
This technology looks for consecutive crop marks and realigns the media accordingly, thus achieving highly accurate cutting on each image.
Half Cut
This technology combines “die cut” and “kiss cut” into a single contour, leaving a few connection points that hold the image in place after cutting into the media roll.
Over Cut
This technology cuts a perfect intersection at the beginning and end points in a single contour, ensuring easy vinyl removal.
Corner Cut
This technology creates the perfect intersection of all sharp corners in a single contour, ensuring the ideal cut.
